OptionsHow do you choose the right level of crawl space work?
Choose the level of crawl space work by what's wrong underneath: damp air, standing water or rotting wood. Six scopes, ordered by lowest starting price. Closing a crawl space needs a way to dry the air, and the Department of Energy's 2013 guide warns that "simply sealing the vents could make the situation worse."
1DIY encapsulation
Cheapest to buy
You lay, lap and tape the liner yourself. A 12' x 100' roll (1,200 sq ft) costs $79.99 in 6-mil, $167.99 in 10-mil, $334.99 in 12-mil and $539.99 in 20-mil woven at Crawlspace Depot, priced November 16, 2026.
Price: $100–$400 in supplies for a 1,500 sq ft floor liner (CostHelper); Today's Homeowner says a DIY encapsulation can be "as cheap as $2,000."
Good
- Skips labor, 50%–70% of a pro's bill
- You choose the liner thickness
Watch out
- The code wants 6-inch taped laps and 6 inches up the wall (IRC R408.3)
- Doesn't fix water, rot or humidity on its own
See liner prices at Crawlspace Depot
2Vapor barrier only, installed
Floor liner, vents left open
A crew lays a liner over the dirt floor and leaves the crawl space vented. It cuts ground moisture: the 2012 model code lets a vented crawl space use a tenth of the vent area once the ground is covered by a Class I vapor retarder.
Price: $1,500–$4,000 (Fixr, Jan 2025); $1,000–$3,000 or more for 1,500 sq ft (CostHelper).
Good
- Lowest professional price
- No dehumidifier to buy or run
Watch out
- Outside air still comes in through the vents
- Not an encapsulation, whatever the quote calls it
Read CostHelper's vapor barrier prices
3Full encapsulation
Liner, walls and vents sealed
Full encapsulation runs a liner over the floor and up the walls, tapes the seams and seals the vents, closing the crawl space to outside air. The model code's unvented crawl space needs a continuous Class I vapor retarder plus a way to dry the air: exhaust, conditioned air or, in the current model text, a dehumidifier.
Price: $1,500–$15,000, about $5,500 (This Old House, Mar 2026); a complete system averages $5,000–$7,000 (CostHelper).
Good
- 15%–18% less heating and cooling energy in DOE's research homes
- Humidity cut by over 20% (DOE)
Watch out
- The air still has to be dried
- Mold, rot or water work comes first, and costs extra
Read DOE's crawl space research
4Encapsulation with a dehumidifier
The usual way to dry the air
A dedicated crawl space dehumidifier keeps the closed space dry and drains to a floor drain or sump, as Advanced Energy, the North Carolina research center behind closed crawl spaces, recommends. The EPA's indoor target is below 60% humidity, ideally 30% to 50%.
Price: Adds $800–$2,000 installed (This Old House). The 70-pint units alone sell for $1,689.99 (Santa Fe Compact70) and $1,769.99 (AprilAire E070) at Crawlspace Depot.
Good
- Holds humidity at a set level
- No ductwork changes
Watch out
- Bob Vila's 2022 figure ($800–$1,200) is below today's unit prices
- Runs on electricity and needs a drain
See dehumidifier prices
5Encapsulation with drainage and a sump
For standing water
When water pools on the crawl space floor, a liner on its own won't stop it; a drain line and sump pump under the liner carry the water out before the space is sealed.
Price: Drainage $600–$1,800 (This Old House); an interior drain $700–$5,200 and a sump pump $650–$1,800, most about $1,300 (Bob Vila, 2022).
Good
- Deals with the water, not just the vapor
- Gives the dehumidifier a place to drain
Watch out
- The widest price spread of any line
- Outside grading is another $1,400–$5,200 (Bob Vila)
Read Bob Vila's line items
6An installer network's system
Branded liner and warranty
Installer networks sell their own systems. CleanSpace, from Basement Systems, is a 20-mil liner sold only through certified installers, with a "25-year total performance warranty."
Price: $4,000–$14,000 or more for CleanSpace (CostHelper). Crawl Space Ninja says its small jobs have run "well over $15,000."
Good
- One company for liner, drainage, dehumidifier and repairs
- A long maker warranty
Watch out
- The warranty's terms and transfer rules aren't on the maker's page
- Hardest to compare unless each line is priced
See CleanSpace's page